Drive efficiency to it's full potential with a 2 flute compression chip breaker. These bits will produce chips at an astonishing rate and leave a perfect top and bottom finish.
Suitable for
- Composite Materials (not ACP/ACM)
- Laminate
- Melamine
- Melamine Particle Board
- MDF/HDF
- Veneered Plywood
- Softwood
Not advisable
- Hardwoods
Adam’s Tips
These bits are meant for industrial application and must be treated mean to be kept sharp. This means they will need to be feed at a high rate so that the bit does not overheat or collect residue. Alternatively, drop your spindle speed to ensure a consistent chip load.
| Feeds and Speeds - HERO 2 Flute Compression mm per minute |
||
| Wood | ||
| Item Code | Description | Soft |
| M16-4006228 | 6mm x 12.7mm x 22mm 2F | 13,150 |
| M16-4008228 | 8mm x 12.7mm x 22mm 2F | 29,100 |
| Revolutions per minute 16,000RPM | ||
| 100% width per cut slotting | ||
| Depth per cut Diameter x 1 | ||
1 Review Hide Reviews Show Reviews
-
Great bit
High quality item and packaging
