null Skip to main content

3 Flute STRAIGHT Chip Breaker Carbide End Mill

$44.12 - $51.93
(1 review) Write a Review
Adding to cart… The item has been added

This is a serious bit for some serious wood cutting. Sporting 3 flutes and chip breakers, this bit chews through timbers, plys and veneers at 50% faster than 2 flute. These bits will produce chips at an astonishing rate and leave a perfect top and bottom finish. 3 flutes only come in minimum 6mm shank 

Suitable for

  • Wood (MDF, hardwood)
  • Wood (Ply & softwoods)

Adam’s Tips

These bits are meant for industrial application and must be treated mean to be kept sharp. This means they will need to be feed at a high rate so that the bit does not overheat or collect residue. Alternatively, drop your spindle speed to ensure a consistent chip load.

Feeds and Speeds - 3 Flute Straight Chip Breaker
mm per minute
   
 Wood
Item Code Description  Soft  Hard
6-6-ST-3F-22 6mm x 6mm x 22mm  3F 17,950 9,000
6-6-ST-3F-30 6mm x 6mm x 30mm  3F 12,550 6,300
       
Revolutions per minute 16,000RPM     
100% width per cut slotting     
Depth per cut Diameter x 1     

1 Review Hide Reviews Show Reviews

  • 5
    6mm 3 Flute Chipbreaker

    Posted by Danyon Lawrence on 22nd Mar 2023

    Using on my upgraded Bluey, this bit flies through hardwood with ease and leaves a great finish. Perfect for jobs when you need fast cutting, a good finish, and don't have time to swap from a rougher to a finishing bit. This bit will satisfy those needs.