The most versatile bit you need to have in your set is the tapered ball nose. Capable of engraving wood, plastics, soft metals and even steel, these are a high quality bit and withstand a beating even with a R0.25mm tip. Some uses of this bit include cutting PCB tracks, engraving lettering in ABS or even steel plates, 3D carving of aluminium or brass and much more.
Suitable for
- Plastics (ABS, acrylic, HPDE etc.)
- Wood
- Steel
- Soft Metals (use an appropriate coolant)
- Ferrous metals (use an appropriate lubricant)
Adam’s Tips
Avoid a deep depth of cut to improve the finish of your material and increase the feed rate to make up for lost time. Also, use a coolant when cutting soft metals and lubricant when cutting ferrous metals to ensure the cleanest finish.
| Description | Shank | Radius | Cutting Length | Angle |
| R0.25mm x 3.175mm x 15mm 2F | 3.175 | R0.25 | 15 | 5 |
| R0.5mm x 3.175mm x 15mm 2F | 3.175 | R0.5 | 15 | 4.2 |
| R0.75mm x 3.175mm x 15mm 2F | 3.175 | R0.75 | 15 | 3.2 |
| R1.0mm x 3.175mm x 15mm 2F | 3.175 | R1.0 | 15 | 2.2 |
| R0.25mm x 6mm x 20mm 2F | 6 | R0.25 | 20 | 7.8 |
| R0.5mm x 6mm x 20mm 2F | 6 | R0.5 | 20 | 7.1 |
| R0.75mm x 6mm x 20mm 2F | 6 | R0.75 | 20 | 6.4 |
| R1mm x 6mm x 20mm 2F | 6 | R1 | 20 | 5.7 |
| R1.5mm x 6mm x 20mm 2F | 6 | R1.5 | 20 | 4.3 |
| R2mm x 6mm x 20mm 2F | 6 | R2 | 20 | 2.9 |
| R0.25mm x 6mm x 30.5mm 2F | 6 | R0.25 | 30.5 | 5.2 |
| R0.5mm x 6mm x 30.5mm 2F | 6 | R0.5 | 30.5 | 4.7 |
| R0.75mm x 6mm x 30.5mm 2F | 6 | R0.75 | 30.5 | 4.2 |
| R1.0mm x 6mm x 30.5mm 2F | 6 | R1.0 | 30.5 | 3.8 |
| R1.5mm x 6mm x 30.5mm 2F | 6 | R1.5 | 30.5 | 2.8 |
| R2.0mm x 6mm x 30.5mm 2F | 6 | R2.0 | 30.5 | 1.9 |
52 Reviews Hide Reviews Show Reviews
-
These were just as ordered. Cut well and keep a good edge and are very well suited to my cnc 3d work. Price is excellent in comparison with other similar items on the market and the contact and after sales service is good.
An A1 rated and affordable product.
-
carbide bit
You cant beat these bits, great. and they hold their edge well.
-
carbide bit
This ball nose bit is excellent for finishing cut, minimal sanding required, I do recommend this bit.
-
Perfect
Great pieces as always no need to spend large amounts when you have these beauties doing the same job and effectively!!
-
Great tapered bit.
Awesome tapered bit. Smooth cut and great detail.
-
Quality
Having problems with my CNC so haven't had the chance to use as yet.
-
Great mill used on redgum very clean cut
Good service, will be interesting to see how long it stays sharp, so far very good.
