A 4 flute spiral end mill is the general purpose cutter for steel. Four flutes give a stronger core and a finer finish than a 2 flute, at the cost of chip room, which is why it suits side (peripheral) milling and light slotting rather than deep full-width slots. The TiSiN coating lets it run in carbon steel, alloy steel, stainless and pre-hardened material up to HRC55 without the edge burning off.
On a CNC router this is the cutter for steel brackets, jigs and fixtures where you need accurate walls and a square corner. For aluminium use a 2 or 3 flute uncoated or DLC end mill instead; the extra flutes on this tool will pack up with soft, gummy chips.
4 flute solid carbide slot mill with a TiSiN coating giving it a capability to cut materials up to HRC55. This mill is primarily used for edge or peripheral milling.
Sizes run from 1mm to 16mm cutting diameter on 4mm to 16mm shanks, with standard and extra-long cut lengths in the popular sizes.
Every size lists a starting feed rate on the product page where we have tested it. For the method behind the numbers read the Feeds & Speeds Guide, or use Message Adam above if you're unsure which size suits your machine.
Stocked in our Laverton North (Melbourne) warehouse and shipped Australia-wide. Standard shipping is free on orders over $200.
Sizes and dimensions
4 Flute SPIRAL Carbide End Mill TiSiN HRC 55 comes in 17 sizes. Pick yours from the size options above; the dimensions for each are listed here.
| Cutting diameter | Shank | Cut length | SKU |
|---|---|---|---|
| 1mm | 4mm | 4mm | 1-4-SP-4F-4-C55 |
| 1.5mm | 4mm | 4mm | 1.5-4-SP-4F-4-C55 |
| 2mm | 4mm | 6mm | 2-4-SP-4F-6-C55 |
| 3mm | 4mm | 8mm | 3-4-SP-4F-8-C55 |
| 4mm | 4mm | 11mm | 4-4-SP-4F-10-C55 |
| 4mm | 4mm | 20mm | 4-4-SP-4F-20-C55 |
| 5mm | 5mm | 35mm | 5-5-SP-4F-35-C55 |
| 6mm | 6mm | 15mm | 6-6-SP-4F-15-C55 |
| 6mm | 6mm | 40mm | 6-6-SP-4F-40-C55 |
| 8mm | 8mm | 20mm | 8-8-SP-4F-20-C55 |
| 8mm | 8mm | 40mm | 8-8-SP-4F-40-C55 |
| 10mm | 10mm | 25mm | 10-10-SP-4F-25-C55 |
| 10mm | 10mm | 35mm | 10-10-SP-4F-35-C55 |
| 10mm | 10mm | 50mm | 10-10-SP-4F-50-C55 |
| 12mm | 12mm | 30mm | 12-12-SP-4F-30-C55 |
| 14mm | 14mm | 45mm | 14-14-SP-4F-45-C55 |
| 16mm | 16mm | 45mm | 16-16-SP-4F-45-C55 |
Buying guide: 2 vs 3 vs 4 Flute End Mills
20 Reviews Hide Reviews Show Reviews
-
Machining steel plate
Found the performance excellent and will look to order larger diameter bits soon.
-
Surprisingly Robust
These things are pretty much indestructible. Highly recommend. Router cutting mild steel with these works very well - they take a hell of a lot of abuse
-
quality and delivery
excellent, value for money, and ethics
-
milling steel
It performed very well
-
carbide end mill
Good quality, fast delivery. I have given up buying direct from China as quality is hit and miss
-
carbide endmill
very happy cuts great
-
4 FLUTE SPIRAL CARBIDE END MILL TISIN HRC 55
all good cuts great
-
as what I expected and works well
awesome service kept well informed of progress of delivery and arrived on time will recommend too my friends
-
carbide bit
These carbide bits are great, they just keep on going, and the don't even get hot.