Used in sign-making and detail work, V-bits are great for carving intricate design in detail on a wide range of materials. V-bits add depth and dimension where the same result cannot be achieved with a flat bit. These are a 1 flute cutter so the finish on softer material will leave a slight burr.
Suitable for
- Plastics (ABS, acrylic, HDPE etc.)
- Wood
- Soft Metals
Adam’s Tips
A V bit is a great alternative to a small diameter straight cutter in engraving very fine detail. Use a smaller degree bit with a finer tip to achieve width of cuts smaller than 0.5mm. It is advisable to test on some scrap your carve to dial in the desired result.
Best for
- Fine-detail engraving and small text in wood, acrylic, ABS, aluminium and brass
- Sign work needing very fine lines, with tips from 0.1mm and angles from 10° to 90°
- Replacing tiny flat cutters that break easily
Not for
- Deep V-carving: use a TCT V router bit or an insert V bit
- The cleanest finish in soft plastic: a 1 flute leaves a slight burr
Adam's Tip
Use a smaller angle with a 0.1mm tip for lines under 0.5mm wide. Test on scrap to dial in the depth.
Buying guide: V-Bit Angles Explained
Frequently asked questions
What is a 1 flute V bit used for?
Fine-detail engraving and sign work. It is a sharper alternative to a tiny flat cutter and can cut lines narrower than 0.5mm.
Which angle and tip should I choose?
Angles run from 10° to 90° with 0.1mm or 0.3mm tip flats. A smaller angle with a finer tip cuts narrower lines; a wider angle cuts broader, shallower V grooves.
What materials can it engrave?
Hardwood, softwood, MDF / HDF, acrylic, ABS, aluminium and brass. Being single flute, it can leave a slight burr in softer materials.
Any tips before the real job?
Test the carve on scrap first to dial in depth and line width.
30 Reviews Hide Reviews Show Reviews
-
60degree v bit
Great quality, arrived quickly , great price
-
Router bits
Good quality product at a reasonable price
-
CNC Router bits
So far I have not used the 3 bits you sent but if they are the same quality I have received in the past I'm sure I won't be disappointed.
-
.1 end mill
Great product
-
60 deg bit
I only received the bits yesterday and have not had a chance to use yet. I have had these bits before and found them to be very good. Plus the seller Adams Bits is very easy to deal with and quick service and a big plus is that he is in Australia I like to deal as local as possible.
-
V Bit
I've given the bits 4 stars simply because I have nothing to compare them with even though they have done their job very well.
-
V Bit Carbide End Mill (for Engraving)
very happy with product so far, just waiting to see how they perform over the log term.
-
V BIT CARBIDE END MILL (FOR ENGRAVING)
Excellent cutting and great finish
-
engraving bit
as usual great product and service from Adam
