Used in sign-making and detail work, V-bits are great for carving intricate design in detail on a wide range of materials. V-bits add depth and dimension where the same result cannot be achieved with a flat bit. These are a 1 flute cutter so the finish on softer material will leave a slight burr.
Suitable for
- Plastics (ABS, acrylic, HDPE etc.)
- Wood
- Soft Metals
Adam’s Tips
A V bit is a great alternative to a small diameter straight cutter in engraving very fine detail. Use a smaller degree bit with a finer tip to achieve width of cuts smaller than 0.5mm. It is advisable to test on some scrap your carve to dial in the desired result.
Best for
- Fine-detail engraving and small text in wood, acrylic, ABS, aluminium and brass
- Sign work needing very fine lines, with tips from 0.1mm and angles from 10° to 90°
- Replacing tiny flat cutters that break easily
Not for
- Deep V-carving: use a TCT V router bit or an insert V bit
- The cleanest finish in soft plastic: a 1 flute leaves a slight burr
Adam's Tip
Use a smaller angle with a 0.1mm tip for lines under 0.5mm wide. Test on scrap to dial in the depth.
Buying guide: V-Bit Angles Explained
Frequently asked questions
What is a 1 flute V bit used for?
Fine-detail engraving and sign work. It is a sharper alternative to a tiny flat cutter and can cut lines narrower than 0.5mm.
Which angle and tip should I choose?
Angles run from 10° to 90° with 0.1mm or 0.3mm tip flats. A smaller angle with a finer tip cuts narrower lines; a wider angle cuts broader, shallower V grooves.
What materials can it engrave?
Hardwood, softwood, MDF / HDF, acrylic, ABS, aluminium and brass. Being single flute, it can leave a slight burr in softer materials.
Any tips before the real job?
Test the carve on scrap first to dial in depth and line width.
30 Reviews Hide Reviews Show Reviews
-
Very good
Very clean cut, better job than some of the more expensive ones that I have had
-
Quality Tooling
good clean edges, accurate shape and dimension. do the job well.
-
Works a treat as it should on medium hard wood
A great product for a very affordable price. Use with a Shapeoko 3 and a Makita router. Using F-Engrave and Carbide motion let you engrave from a JPG dreawing. No Drama. Henri.
