Connecting a plasma cutter to a CNC table needs the right plug for the machine's CNC port. This 14 pin AMP/TE connector fits the interface socket on UNIMIG Razor Cut 45 and 80 cutters and a range of Thermacut, Thermal Dynamics and Hypertherm power sources, giving you the torch start and arc voltage (divided) signals your torch height controller needs.
CNC Port plug to suit all plasma power sources with a 14pin TE AMP plug
Suitable for:
- UNIMIG Razor Cut 45
- UNIMIG Razor Cut 80
- Hypertherm series
- Thermacut series
- Thermal Dynamics
Wire it to a Proma THC or the MyPlasm CNC system. Check your machine's manual for the pin-out; it varies by brand.
Stocked in our Laverton North (Melbourne) warehouse and shipped Australia-wide. Standard shipping is free on orders over $200.
Best for
- Connecting a plasma cutter's 14 pin CNC port to a CNC table or THC
- UNIMIG Razor Cut 45 and 80, and Thermacut, Thermal Dynamics and Hypertherm machines with a 14 pin TE AMP socket
Not for
- Plasma cutters without a 14 pin CNC port
Adam's Tip
Pin-outs vary by brand, so wire it from your machine's manual. You'll typically need torch start and divided arc voltage for a Proma THC or MyPlasm system.
1 Review Hide Reviews Show Reviews
-
14Pin AMP/TE UNIMIG Plasma Machine Plug to suit CNC Port RAZOR CUT 45/80
Fantastic service from Adam, was posted the same day. He was very helpful with advice on other products purchased. Plug was as described and allowed me to connect plasma cutter to the table control box.
