Make template work a breeze with a HERO Tools Flush Trim Router Bit with Top Bearing! Ideal for use for profile, as well as any other template work where the template is mounted on the top face of the workpiece. Suitable for use with hand-held and table-mounted portable routers.
Suitable for
- Wood (MDF, hardwood)
- Wood (Ply & softwoods)
- Melamine White Board
- Timber composites
NOTE ON TRANSITIONING TO ARDEN
You might have noticed that each router bit profile shows both Arden and Hero. Truth is that they are the same company and the only difference is the colour and name. Until all Hero stock has been exhausted, we will be supplying one or the other or both.
Best for
- Template and pattern work with the template on top of the workpiece
- Copying parts in hardwood, softwood, ply, MDF, melamine and particleboard
- Hand-held routers or router tables
Not for
- Templates fixed under the work with a hand router: use the bottom bearing version
Adam's Tip
Rough cut close to the line first so the bit only trims 2–3mm. Check the bearing spins freely before each job, and keep it riding firmly on the template.
Sizes and dimensions
ARDEN Flush Trim with Top Bearing comes in 8 sizes. Pick yours from the size options above; the dimensions for each are listed here.
| Cutting diameter | Shank | Cut length | SKU |
|---|---|---|---|
| 12.7mm (1/2") | 6.35mm (1/4") | 5mm | 10217014 |
| 12.7mm (1/2") | 6.35mm (1/4") | 10mm | 10218014 |
| 12.7mm (1/2") | 6.35mm (1/4") | 15mm | 10218024 |
| 12.7mm (1/2") | 6.35mm (1/4") | 25.4mm | 10215014 |
| 12.7mm (1/2") | 6.35mm (1/4") | 31mm | 10215024 |
| 15.9mm (5/8") | 6.35mm (1/4") | 25.42mm | 10215034 |
| 19mm | 12.7mm (1/2") | 25.4mm | 10215058 |
| 19mm | 12.7mm (1/2") | 50.8mm | 10215078 |
Frequently asked questions
When do I use a top bearing flush trim bit?
For template trimming and pattern copying where the template sits on top of the workpiece. The bearing rides the template and the cutter trims the work flush to it.
Can I use it in a hand-held router?
Yes. It suits hand-held and table-mounted routers. The bearing is matched to the cutting diameter for an exact flush cut.
What materials can it trim?
Hardwood, softwood, plywood, MDF / HDF, melamine board and particleboard.
Which cut length do I need?
Choose a cutting length a little longer than the thickness of the material you are trimming. Lengths run from 5mm to 50.8mm.
3 Reviews Hide Reviews Show Reviews
-
Trimming bit
Works like what was needed to finish the job
-
Trim bit with bearing
Very satisfied with this bit's performance. As usual high quality and great price. Can recommend. As usual for Adams products !!
-
Flush trim worth having
These are indispensable when you need to flush trim anything. Great quality bit.
