Skip to main content

Chamfer V-bit 2 flute 90deg Uncoated Carbide HRC45

Adam's Bits

$17.95
(1 review) Write a Review
SKU:
0-6-V-90-U55 [X-N4]
Suitable Material:
Aluminium / Plastics
Cutter Profile:
2 flute 90° chamfer
Suitable Use:
CNC
Adding to cart… The item has been added

A 90° chamfer mill does three jobs on a CNC: chamfering and deburring edges, spot drilling before a twist drill, and countersinking for metric screws (which use a 90° head angle). This uncoated version keeps the sharpest possible edge, which is what aluminium, brass, copper and plastics want; a coating would round the edge slightly and encourage built-up edge in soft metals.

Uncoated Carbide Chamfer V Bit 2 flute 90° Point V-bit. Mills with no coating are suitable for aluminium with their sharper edge. For accurate and fast spotting on CNC machines, jig drills and boring machines, as well as countersinking and chamfering. Only suitable for shallow depth drilling.

Suitable for

  • Non-ferrous metals, soft metals (aluminium, brass, copper etc.)
  • Wood
  • Plastics

Sizes 3mm to 12mm. For steel and stainless use the TiSiN coated version.

Every size lists a starting feed rate on the product page where we have tested it. For the method behind the numbers read the Feeds & Speeds Guide, or use Message Adam above if you're unsure which size suits your machine.

Stocked in our Laverton North (Melbourne) warehouse and shipped Australia-wide. Standard shipping is free on orders over $200.

Sizes and dimensions

Chamfer V-bit 2 flute 90deg Uncoated Carbide HRC45 comes in 7 sizes. Pick yours from the size options above; the dimensions for each are listed here.

AngleCutting diameterShankSKU
90°3mm4mm0-3-V-90-U55
90°4mm4mm0-4-V-90-U55
90°5mm5mm0-5-V-90-U55
90°6mm6mm0-6-V-90-U55
90°8mm8mm0-8-V-90-U55
90°10mm10mm0-10-V-90-U55
90°12mm12mm0-12-V-90-U55

1 Review Hide Reviews Show Reviews

  • 5
    Chamfer V-Bit 2 Flute 90Deg

    Posted by Bear Timber on 1st Nov 2022

    This is 90Deg V-Bit is great for detailed work, and stays sharp for long periods of time compared to others I’ve used in the past, which is very important to me, to keep down the cost of products. And don’t be afraid to use your speeds and feeds, this type of Bit loves it compared to your regular flare blade bits. I’ll always keep this 90Deg in my arsenal of tooling.