V wheels are what carry the carriages on Makerslide and V-Slot based CNC routers such as the X-Carve, Shapeoko and BlueCarve Bluey. Over time they wear flat, pick up debris or develop play, and the first sign is usually a wavy or stepped cut. Replacing worn wheels is a cheap fix that brings the machine back to square.
This is a dual-bearing acetal (Delrin) V-wheel for the MakerSlide system.
No bearing or shim included
Sold as the Delrin wheel only, bearings and spacers not included. Replace wheels in sets per carriage so they wear evenly.
Stocked in our Laverton North (Melbourne) warehouse and shipped Australia-wide. Standard shipping is free on orders over $200.
Best for
- MakerSlide and V-slot CNC routers such as the X-Carve, Shapeoko and BlueCarve Bluey
- Fixing wavy or stepped cuts caused by worn, flat or loose wheels
Not for
- Linear-rail machines (HGR rails and blocks)
- Buyers needing bearings and spacers: sold as the Delrin wheel only
Adam's Tip
Replace the wheels on a carriage as a set so they wear evenly, then adjust the eccentric nuts until there's no play but the wheel still turns by hand.
1 Review Hide Reviews Show Reviews
-
V wheel
Amazing service