-
CARBiTOOL - 3 Flute – Polystyrene Bit
MSRP: $155.43 - $193.36$141.31 - $175.78 -
Extra Long XPS Styrofoam Cutters Spiral BALL NOSE Up Cut HSS
$25.85 - $131.95 -
Extra Long XPS Styrofoam Cutters Spiral Up Cut HSS
$25.85 - $56.69
Router Bits for Foam
Foam is easy to cut and hard to cut well: standard bits are too short for thick blanks and leave a torn surface. These cutters have long cutting lengths and sharp, open geometry for XPS and EPS foam, polystyrene, surfboard blanks, props and packaging.
- Extra long spiral up cut for profiling blanks up to 150mm thick.
- Extra long ball nose for deep 3D carving.
- CARBiTOOL 3 flute polystyrene bit for surfboard and upholstery foam on a 57mm cutting length.
Foam needs high feed and moderate RPM; a slow feed melts the surface. Dust extraction is essential, foam dust goes everywhere.
Stocked in Laverton North, Melbourne and shipped Australia-wide; standard shipping is free over $200. Every product page lists tested feed rates per size, and the Feeds & Speeds Guide explains how to adjust them for your machine. Not sure? Call Adam on 0448 431 833.