Skip to main content

2 Flute 15deg High Helix SPIRAL CUT Carbide End Mill

Adam's Bits

$10.84
(3 reviews) Write a Review
SKU:
4-4-FC-2F-42 [X-F4]
Suitable Material:
Foam
Cutter Profile:
2 flute 15° high helix up cut
Suitable Use:
CNC
Adding to cart… The item has been added

Cutting foam has now been made easier with a 15deg high helix 2 flute spiral up cut. Designed to cut rather than tear material away, this half way between a straight and spiral bit can be used on most hard and soft foams. Great for making tool inserts, kaizen boards, box padding, product inserts and more.

Suitable for

  • EVA (Ethylene-vinyl Acetate Foam)
  • Most polystyrenes
  • Most machinable foams

Adam’s Tips

All foams have not been created equal and albeit that cheap hardware store floor mat foam might be enticing, it's good to test to see which yields the best results. The rule of thumb is the harder the material the better it will cut. 

Best for

  • EVA and polystyrene foam: tool-drawer inserts, shadow boards and packaging
  • Slicing foam cleanly instead of tearing it, thanks to the low 15° helix
  • Sizes from 3.175mm to 8mm, up to 62mm long

Not for

  • Very thick XPS or EPS blocks: use the extra-long HSS foam cutters
  • Wood and plastics

Adam's Tip

Foams vary a lot, so test first. Harder, denser foam cuts cleaner. Keep the foam held flat with tape or a vacuum table, because soft foam lifts and distorts under the cutter.

Sizes and dimensions

2 Flute 15deg High Helix SPIRAL CUT Carbide End Mill comes in 8 sizes. Pick yours from the size options above; the dimensions for each are listed here.

Cutting diameterShankCut lengthSKU
3.175mm (1/8")3.175mm (1/8")17mm1/8-1/8-FC-2F-17
3.175mm (1/8")3.175mm (1/8")32mm1/8-1/8-FC-2F-32
4mm4mm22mm4-4-FC-2F-22
4mm4mm42mm4-4-FC-2F-42
6mm6mm22mm6-6-FC-2F-22
6mm6mm42mm6-6-FC-2F-42
6mm6mm62mm6-6-FC-2F-62
8mm8mm62mm8-8-FC-2F-62

3 Reviews Hide Reviews Show Reviews

  • 5
    Foam Cutter

    Posted by Michael Dierer on 10th Jul 2023

    First time attempting to cut foam and it worked out fantastic. Couldn't be happier with this bit !!

  • 5
    Foam Cutter

    Posted by Paul on 1st Jun 2022

    This bit is fantastic, it cuts the foam with no distortion, with a smooth finish. It does need to be run on conventional cut, high RPM and high feed. Will be buying more in the future as required.

  • 5
    Great service

    Posted by Dean Williams on 14th Mar 2022

    Only buy my CNC end mills and parts from Adam’s bits, great service great products