Foam needs a cutter that shears cleanly rather than tearing, and a long cutting length so you can profile thick blanks in one pass. This CARBiTOOL 3 flute polystyrene bit has a 57mm cutting length and a sharp solid carbide edge ground for EPS and XPS foam, surfboard blanks, upholstery foam and packaging foam.
- Solid Carbide
- Suitable for surfboard foam
- Suitable for soft spongy upholstery foam
Available 6.35mm (1/4") and 9.5mm (3/8") on matching shanks. For deeper foam carving up to 150mm see the extra long XPS cutters.
Every size lists a starting feed rate on the product page where we have tested it. For the method behind the numbers read the Feeds & Speeds Guide, or call Adam on 0448 431 833 if you are unsure which size suits your machine.
Stocked in our Laverton North (Melbourne) warehouse and shipped Australia-wide. Standard shipping is free on orders over $200.
Sizes and dimensions
CARBiTOOL - 3 Flute – Polystyrene Bit comes in 2 sizes. Pick yours from the size options above; the dimensions for each are listed here.
| Cutting diameter | Shank | Cut length | CARBiTOOL part no. / SKU |
|---|---|---|---|
| 6.35mm (1/4") | 6.35mm (1/4") | 57.1mm | TSF 8 |
| 9.5mm (3/8") | 9.5mm (3/8") | 57.1mm | TSF 12 3/8 |
Buying guide: MultiCam Tool Equivalents
