An 80mm spindle mount is the standard clamp for 1.5kW and 2.2kW CNC spindles, both water cooled and air cooled. This is a solid aluminium mount with a split clamp and bolt holes on the back face for fixing to your Z axis plate. Check your spindle body diameter before ordering: 1.5kW spindles are commonly 65mm, 2.2kW spindles are 80mm, but there are exceptions.
80mm spindle mount. No bolts included
Mounting bolts are not included. For 65mm spindles and Makita trim routers see the 65mm spindle mount; for a cable to suit see the shielded VFD cable.
Stocked in our Laverton North (Melbourne) warehouse and shipped Australia-wide. Standard shipping is free on orders over $200.
Best for
- Mounting 80mm body CNC spindles, usually 2.2kW, air or water cooled
- Replacing a damaged clamp or building a new Z axis
Not for
- 65mm spindles and Makita trim routers: see the 65mm spindle mount
Adam's Tip
Mounting bolts aren't included. Check the bolt pattern against your Z plate before ordering, and tram the spindle square to the bed after fitting.
