A dust boot is the difference between a clean workshop and a CNC router that coats everything in MDF dust. The brush skirt sits around the cutter, the vacuum port pulls the chips away at the source, and the detachable brush lifts off for bit changes and Z probing without unbolting anything.
Detachable brush dust boot for CNC. 3D printed boot with hose port.
Specifications
- Shaft size 65mm for 800w or 1.5kw spindle, 80mm for 1.5kw or 2.2kw (typical sizes that you will need to check)
- Brush length 50mm
- Hose port diameter 37.5mm (your vacuum hose needs to have a min 37.5mm inner diameter)
Choose 65mm for Makita trim routers and most 800W to 1.5kW spindles, 80mm for 2.2kW spindles. The port takes a 37.5mm hose. Check your spindle diameter before ordering.
Stocked in our Laverton North (Melbourne) warehouse and shipped Australia-wide. Standard shipping is free on orders over $200.
5 Reviews Hide Reviews Show Reviews
-
Dust Boot
Bristles are too long so when using smaller length bits the bristles get caught up in the bit. My bristles got caught up, pulled out the lower section bristle holder from the main body and destroyed it. Also, even if it only damaged the bristle section, you can’t buy a replacement. Use only with longer bits.
-
It works well with my spindle
I would recommend Adam’s bit’s to anyone
-
Dust Boot
Found this a perfect fit for my CNC spindle, not bulky like some and the detachable magnetic brush is a great idea. Very happy with it.
-
Dust Boot
The Dust Boot is a 3D printed unit with a magnetized brush surrounding the bit. For our purposes, the bristles of the brush were a little too long, but we were able to cut them to a more appropriate length without problem. We certainly recommend this product as it has been a valuable addition to our CNC router.
-
DUST BOOT
It fits the Makita 700V router easily and the magnet release is easy plug and play
