Up your game with 1 Flute UP CUT End Mill Diamond Like Carbon (for Aluminium)! DLC bits are phenomenal bits in that they last longer, cut quieter and cut with a mirror finish. You will not be dissapointed.
When cutting soft metals like aluminium & brass, there is nothing easier to use and more suitable than a high grade 1 flute up cut. An 1 flute has the best chip ejection and heat dissipation which avoids jamming due to the gummy nature of soft materials. An 1 flute also has the capability to operate effectively with widely varied feeds and speeds as compared to 2 & 3 flute when slotting. For peripheral cutting, a 2 or 3 flute for soft metals is ideal for the side & bottom finish.
Suitable for
- Soft Metals (Aluminium & Brass)
- Plastics (ABS, acrylic, HPDE etc)
- Aluminium Composite Materials
Adam’s Tips
You will get a different finish on the side of your material depending if you use a climb or conventional cut. Do some test cuts and check which side comes out the best and adjust your toolpath accordingly. These bits are great on plastics as they are really tough but do not have a sharp edge. You will be able to run these bits faster on plastic compared to a 1 flute (for plastics) bit but depending on the finish you require, might only be suitable for cutting all the way through.
Check out https://www.facebook.com/watch/?v=604281453557182&extid=RhvPoVr5k2Mj9aeH
Feeds and Speeds - 1 Flute for Aluminium DLC mm per minute |
||||
Metals | Plastics | |||
Item Code | Description | Soft | Soft | Hard |
1-1/8-DL-1F-4-Al | 1mm x 3.175mm x 4mm 1F | 100 | 650 | 350 |
2-1/8-DL-1F-6-Al | 2mm x 3.175mm x 6mm 1F | 150 | 1,500 | 750 |
2-1/8-DL-1F-12-Al | 2mm x 3.175mm x 12mm 1F | 150 | 1,150 | 600 |
1/8-1/8-DL-1F-8-Al | 3.175mm x 3.175mm x 8mm 1F | 300 | 2,900 | 1,450 |
1/8-1/8-DL-1F-12-Al | 3.175mm x 3.175mm x 12mm 1F | 250 | 2,450 | 1,250 |
1/8-1/8-DL-1F-17-Al | 3.175mm x 3.175mm x 17mm 1F | 200 | 1,950 | 1,000 |
1/8-1/8-DL-1F-22-Al | 3.175mm x 3.175mm x 22mm 1F | 150 | 1,550 | 800 |
4-4-DL-1F-8-Al | 4mm x 4mm x 8mm 1F | 450 | 4,500 | 2,250 |
4-4-DL-1F-12-Al | 4mm x 4mm x 12mm 1F | 400 | 3,800 | 1,900 |
4-4-DL-1F-17-Al | 4mm x 4mm x 17mm 1F | 300 | 3,050 | 1,550 |
4-4-DL-1F-22-Al | 4mm x 4mm x 22mm 1F | 250 | 2,400 | 1,200 |
6-6-DL-1F-17-Al | 6mm x 6mm x 17mm 1F | 750 | 7,500 | 3,750 |
6-6-DL-1F-22-Al | 6mm x 6mm x 22mm 1F | 600 | 6,000 | 3,000 |
6-6-DL-1F-32-Al | 6mm x 6mm x 32mm 1F | 400 | 3,850 | 1,950 |
8-8-DL-1F-22-Al | 8mm x 8mm x 22mm 1F | 1250 | 13,250 | 6,650 |
10-10-DL-1F-32-Al | 10mm x 10mm x 32mm 1F | 1650 | 17,550 | 8,800 |
Revolutions per minute | 24,000 | 16,000 | 16,000 | |
100% width per cut slotting | ||||
Depth per cut Diameter x 1 |
22 Reviews Hide Reviews Show Reviews
-
1 Flute UP CUT End Mill Diamond Like Carbon (for Aluminium)
Great quality. the DLC cuts cleanly and provides a great finish , excellent delivery times
-
Ali cutter
Works great best cutter I have tried yet
-
Single flute
Eats Aluminium and long lasting 12mm and 10mm 5051 sheet
-
Great product
Exactly as described. For the aluminium I was cutting it was nice and quiet, cut really well. Very happy with it. Thanks Adam’s Bits
-
Great Product
Exactly as described. For the aluminium I was cutting it was nice and quiet, cut really well. Very happy with it. Thanks Adam’s Bits
-
Single flute cutter
Awesome bits great price great Finnish and super fast processing delivery. As always from Adam. Cheers Dave Horan
-
4-17mm single flute up cut end mill diamond like carbon (for Ally)
Always good product and service
-
Coating works well still experimenting on feeds ad speeds but looks promising
Tried the non coated and they were great but eventually got some chip weld so far the coated one is fine
-
I think they are a really great end bit
It's a great end bit, drill well can't fault it.