-
Diamond Spring Drag Engraver
$55.54 - $84.36 -
CARBiTOOL - Single Spoon Flute – For Plastic & Aluminium
MSRP: $32.89 - $33.81$29.90 - $30.74 -
-
-
-
-
Router Bits for Plastics & Acrylic
Plastics melt before they cut if the chip cannot get away. Every bit here is chosen for chip evacuation: single flutes with a big polished gullet, high helix spirals, and sharp uncoated or DLC edges.
- 1 flute up cut for plastics is the workhorse for acrylic, polycarbonate, HDPE, PVC and ABS, with the 1 flute DLC for hard plastics and longer life.
- High helix spiral for a polished edge on acrylic signage.
- CARBiTOOL single spoon flute on a 6.35mm shank for trim routers.
- V bits and 1 flute V bits for engraved acrylic and two-tone plastics.
Run them fast: a chip that is too small turns to heat. If the edge is gummy, feed harder or drop the RPM, and keep the cutter sharp, a dull bit melts plastic instantly.
Stocked in Laverton North, Melbourne and shipped Australia-wide; standard shipping is free over $200. Every product page lists tested feed rates per size, and the Feeds & Speeds Guide explains how to adjust them for your machine. Not sure? Call Adam on 0448 431 833.